Step-by-step Guide to Installing a New Shower Unit

Step-by-step Guide to Installing a New Shower Unit

Blog Article

Call Today

In this article down the page you can find a bunch of really good help and advice about How to Build a Shower Enclosure for Your DIY Bathroom.

A successful shower setup needs cautious planning and also a lot of work. Most of the times, you will require to do 3 sorts of jobs: mounting walls, setting up the plumbing, as well as completing walls.

Prep work

To start with, you must pick the kind of shower that you want to install. It is essential to ascertain whether the selected shower is capable of coping with specific systems and can control a safe degree of water with the central heating boiler. A lot of shower devices nowadays are developed to be adaptable to different water stress (such as stored hot water as well as chilly keys).
It is also essential to take into account the water pressure as well as the preparation of the piping and drain for the shower

Various Types of Shower Units

Push-on Mixer: The pipe as well as spray parts of the push-on mixer shower device can be attached to the bathroom faucet based on your requirement, and also the water temperature level can be readjusted by means of the taps. Push-on mixers are cheap and incredibly simple to mount. Nevertheless, although the hose link is easy, it is easily dislodged. In addition, it is troublesome to readjust the temperature.

Bath/Shower Mixer: The hose and also spray of this kind of shower are incorporated with a bath mixer tap, and also the temperature level can be readjusted through the bathroom faucets. It is a really inexpensive alternative and also no added plumbing is included. Nonetheless, the bath/shower mixers likewise struggle with inconvenient temperature level control choices.

Manual Mixer: The pipe as well as spray of a hand-operated mixer shower device are a part of the wall unit as well as the hot and cold water materials are linked to a solitary valve The temperature and pressure of the water are managed via either one or a selection of handles (in a lot more costly showers). Although temperature control is much easier in hand-operated mixer kinds, they are a lot more expensive than the previously discussed mixers. They additionally call for additional plumbing of hot and cold water pipes.

Thermostatic Mixer: The hose pipe as well as spray of this shower kind belong of the wall system and the cold and hot water materials are attached to a single shutoff below too. It is total with an integrated stabiliser to self-adjust the water temperature as well as to stop it from becoming too hot. Among the most significant benefits of a thermostatic mixer shower kind consists of convenient temperature control. Nevertheless, it is the most costly of the different mixer choices.

Power Shower: A power shower is a solitary device having an effective electrical pump that can changing both the water pressure as well as temperature level. This kind of shower can be fitted if there is water from a cold water tank as well as a hot water cylinder. A power shower makes the change of both stress as well as temperature easy. On the other hand, it disagrees for water warmed directly by the shower or where the water is provided by a mix boiler under keys pressure.

Electric Shower: An electrical shower is plumbed into a mains cold water supply and also it heats the water electrically. It is important to note that for this shower type to be mounted, the keys pressure needs to be at the very least 0.7 kg/sq centimeters (10lb/sq in). The system enables the temperature and also stress to be changed via a handle. Models with temperature level stabilisers are better as they remain untouched by other taps in other places being used within the household. A significant disadvantage of electric showers is that the control handle only permits the option of heats at less stress, or lower temperature levels at a higher pressure. This is bothersome in the winter season when the spray is typically weak and the mains water is cooler. Nevertheless, this issue is tackled in some versions which are offered with a winter/summer setup.

Method

Depending upon the sort of shower you wish to install, the shower head need to either be suited order to avoid its contact with the water in the bathroom listed below or the base tray, or it has to have a check valve.
Before starting, it is a good idea to note the placements of the shower head and also control, and also to plan the pipe-work included. In addition, the water drainage system to get rid of the drainage will certainly require to be prepared. Both settings of the cable television route and also the shower button will likewise need to be thought about if an instant or electric shower device is being mounted.
Make use of the guideline guide supplied with the shower system to fit the shower control.Before suitable the pipes that will provide the water to the shower system, it is necessary to cut off the supply of water. In order to protect the pipelines, they ought to be offered a water resistant covering as well as also fitted with separating valves. The pipes can then be hidden into the wall and also glued over to neaten the overall look.
Fit the base tray, shower head, as well as installations.
Link the major shower control to the pipes that will be supplying the water (This may need a women screw string adapter).
Reconnect the supply of water and also test the pipes for any kind of leaks, as some might require tightening up.
If you are setting up an electric shower, remember to switch off the electrical energy supply prior to making any electric connections. As soon as these connections have actually been made (there need to be guidance within the user's manual), the power supply can be switched over back on.

Adjusting Water Pressure to Fit Your Shower

The cold water tank can be raised to a greater elevation (sometimes as little as 150mm (6inches)) by installation a solid wood support beneath it - perhaps composed of struts and also blockboards. If you pick this alternative, the major and also distribution pipes will certainly also need to be increased to meet the new elevation of the storage tank.
Conversely, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it has to be linked right into the power supply in order to run.

Piping as well as Drainage

It is best to utilize 15mm diameter supply pipelines, as well as make the go to the shower as brief and straight as feasible so as to keep maximum stress and minimise warmth loss. In addition, by minimising using elbows for pipe edges, you can decrease the resistance in the circulation of the water system. You can attain this by bending the pipes instead.

Many Common Mistakes

Breaching or overlooking local code restrictions.

Using pipes that are too little.

Affixing copper to galvanized without making use of a brass or dielectric fitting between the two.

Not using tape or pipeline substance at threaded joints.

Not leveling your components when installing them.

Not mounting an air gap loading for components.

Reducing supply stub outs too brief to install the shutoff valves onto after the completed wall surface is in place.

Not effectively straightening tubing into fittings or quit valves. (Forcing the nut onto the compression ring at an angle when the tubes is at an angle will certainly cause a leakage.).

When turning the water back on in your house, constantly run the outside hose valve or purge your bathrooms to bleed dirt and also air from the lines. This debris can cause issues in your sink faucets and other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Hopefully you enjoyed reading our topic on How to Install a Direct-to-Stud Shower Enclosure. Thanks a lot for taking a few minutes to read our blog post. Sharing is caring. One never knows, you may just be doing someone a favor. I value reading our article about How to Install a Direct-to-Stud Shower Enclosure.

Call Today

Report this page